DROIDWORKS SKY JIB 8 WITH DJI WooKong-M RTF

Product Details

DROIDWORX AD-6-S Standard Lifter
The Droidworx AD-6 airframe comes complete for self-assembly and is ready for fitting MikroKopter UAV electronics directly Hoverfly adaptor plates are available. This craft can be fitted with standard 2217 series motors or the Robbe Roxxy 2827 series motors to fit 10inch to 12inch propellers.

Span width from engine center to engine center is 630mm.

As in all the Droidworx range, this airframe is made from high quality, lightweight, UV resistant, vibration absorbing composite components, Carbon Fiber 3k twill tube chosen for it strength, light weight and natural vibration absorption properties carbon fiber center section, machined engineering composite engine mounts quick release vacuum molded and laser cut PETG protective dome cover and carbon fiber undercarriage assembly with vibration isolators and adjustable battery tray.

The modular landing gear/gear rail assembly allows for fitting different camera mounts for various cameras and applications: from the little Uni Mount for Go Pro or mini CCD camera's (aerial survey), the Droidworx DX1/DX2 mounts for light aerial imagery ("point and shoots" up to a Canon G11 size or small HDV cameras and GoPro) up to the high quality engineered Droidworx / PhotoHigher roll and tilt stabilized range of mounts for professionals.

The AD-6 comes complete as a kit (airframe only).

The kit includes:

• 8 x 17mm custom carbon fiber boom in 3k twill with matt finish up to 25 mm avaleble
• 2 x carbon fiber center plates for MK electronics/distribution board ready
• 2 x carbon fiber standard landing gear plates
• 4 x 190mm 7mm 3k twill gear rail and landing gear brace tubes
• 2 x 300mm 7mm 3k twill skids
• 8 x nylon tube locks
• 8 x machined composite 40mm engine mounts with position lock (18 pcs total)
• 24 x stainless steel M3 x 6mm countersunk machine screws (engine mounting)
• 8 x 50mm heatshrink (black)
• 1 x vacuum molded and laser cut PETG dome cover
• 4 x quick release alloy dome fixing pins
• 4 x rubber dome grommets
• 4 x R-clips
• 4 x M3 x 35mm stainless steel socket head cap screws
• 12 x M3 x 30mm alloy socket head cap screws
• 14 x M3 x 27mm alloy socket head cap center plate boom fixing screws
• 40 x machined composite boom fixing clamps
• 10 x M3 x 12mm alloy gear rail / landing gear fixing screws
• 16 x M3 alloy nyloc nuts
• 16 x M3 stainless nyloc nuts
• 4 x M3 x 2mm nylon spacers
• 12 x M3 nylon washers
• 2 x poly carbonate composite gear rail brackets
• 2 x carbon fiber gear rail bracing plates
• 2x rubber vibration isolators
• 12 x 10mm rubber grommets
• 2 x vinyl skid end caps
• 4 x high visibility skid stickers (fluro orange and fluro green)
• 10 x M3 x 12mm nylon standoffs
• 10 x M3 x 6mm countersunk nylon standoff screws
• 10 x M3 nylon standoff nuts
• 2 x Droidworx white vinyl landing gear stickers
• 2 x Droidworx white vinyl boom stickers
• 2 x carbon fiber battery bay plates
• 1 x Velcro battery strap
• 1 x packet assorted spare items.

Features

• GPS ATTI

  GPS (inclusive) Position, Altitude hold and Heading hold

• 3-AXIS GYRO+Barometer

  Attitude mode using accurate barometer sensor for altitude hold

• The counter ESC

  Use regular over the counter ESC

• Three flight modes

  Three flight modes – manual, Attitude and GPS Attitude

• Fail-Safe

  Fail Safe Hover, Go Home & Auto Landing

• Low voltage protection

  Two-level low voltage protection.

• Power Module

  Versatile power module for MC power supply,voltage monitoring and CAN bus connections 3A Switching BEC

• D-Bus

  D-Bus supports S-BUS receiver system