Features
DJI Wookong Multi-Rotor stabilization controller is a complete flight system for all multi-rotor platforms for commercial and industrial AP applications. Unlike others, WooKong allows the use of regular ESC commonly used in RC helicopter without any wiring modification; Heli mode setup providing a seamless transition for current Ace One AP professionals. WK-M utilizes high quality components precisely calibrated with temperature compensation in all gyros and sensors, industry renounce flight algorithm in autopilot and UAV. IMU damping system is rated for gas engine best in the class.
Attitude mode maintains precise altitude hold for indoor flight while GPS mode provides superb position ...
Product Details
WooKong-M
Multi Rotor Types: Quad-Rotor / Hex-Rotor / Octo-Rotor
Supported ESC output: 400Hz refresh frequencys
Recommended Transmitter: PCM or 2.4GHz with minimum 5 channels and Failsafe function available on all channels
Recommended Power Supply: DC 4.8 ~ 12V
Power Consumption: MAX 5W (0.9A@5V, 0.7A@5.8V,0.5A@7.4V,0.4A@8V)
Operating Temperature: -5°C to +60°C (You have to keep the IMU warm if you want to use it under low temperature, could be -5°Cor lower.)
Flight Performance (can be effect by mechanical performance)
Hovering Accuracy:
Vertical: ± 0.5m
Horizontal: ± 2m
Suitable Wind Condition: < 8m/s (17.7mph)
Max Rotate Angle: 30°
Vertical Speed: 3m/s
Packaging &Shapes
Dimensions
Main Controller: 61mm x 39.6mm x 15.8mm
IMU: 40mm x 31mm x 26mm
GPS & Compass: 50mm (diameter) x 9mm
LED Indicator: 25mm x 25mm x 7mm
Total Weight: <= 150g
Built In Functions
Auto-pilot
Fail-safe Hover
Gimbal Stabilization
Voltage monitor
Go Home & Auto Landing
WooKong-M View Data Link
Hardware Interface: USB2.0
Radio Frequency: 900 MHz / 2.4 GHz
Transmit Power: 1000mW / 130mW
Data-Throughput: 11,520 bps
Communication(Open air): ≤3km （2.4GHz 2dbi antenna）
≤10km (900MHz 2dbi antenna)
Auto Pilot Controller
BRUSHLESS GIMBALS
Specials ...
