Specials
welcome to or store


MATEK CAN-G474 Board with 5Mbit/s CAN Transceiver and STM32G474



$189.99

Add to Cart:


  • Description
  • Details
  • Reviews
  • offthegridsun info
Features
MATEK CAN-G474 Board with 5Mbit/s CAN Transceiver and 22 $189.99
STM32G474 MCU AP_PERIPH CAN NODE for RC FPV Drone
*CAN-G474 is an Adapter Node based on ArudPilot AP_Periph firmware.
*With 5Mbit/s CAN transceiver and STM32G474 MCU, CAN-G474 is capable of CANFD.
*With this board, you can easily utilize the ArduPilot driver library to
convert ArduPilot supported GNSS, Compass, Barometer, Airspeed sensor,
Rangefinder, Proximity sensor, Electronic Fuel Injectors and GPIO based
(PWM, LED notify) peripherals to DroneCAN bus peripherals.
Product Details
* MCU: STM32G474CE, 512KB Flash
* CAN transceiver data rates up to 5Mbit/s
* 2x CAN bus
* 4x UARTs
* for peripheral GNSS, Rangefinder, Proximity,
EFI, RC input(receiver)
* support GNSS, Compass, Barometer sensors
over MSP protocol. MSP is enable on TX3 by default.
* 2x I2C bus
* for peripheral I2C Airspeed sensor, Barometer, Compass
* 1x SPI
* for peripheral RM3100
* SPI pads for RM3100 are on bottom side, with
“CS, MOSI, MISO, SCK” silkprint
* 11x PWM outputs
* for Servos and ESC, all PWMs support DMA/DShot
* PWM1-10 on DuPont 2.54mm holes
* PWM11 pad is on bottom side, with “11” silkprint
* ST debug, SWC & SWD(on bottom side)
* UART1(TX1,RX1) support firmware update in DFU mode
LED
* Blue, Fast blinking, Booting
* Blue, Slow blinking, communicating with flight controller
* Red, 3.3V indicator
* Input voltage range: 4.5~5.5V @5V pad/pin
* Power consumption: 62mA
* Operating Temperatures: -30~85 °C
Physical
*5x JST-GH-4P(SM04B-GHS-TB) for CAN1, CAN2, I2C1, UART1 and UART4
*1x JST-GH-6P(SM06B-GHS-TB) for UART3+I2C2
*18x DuPont 2.54mm holes
*Board Size: 36mm*36mm*6mm. 5.2g,
*Mounting: 30.5mm 4x Dia.3mm
Item Packing
1×MATEK CAN-G474 Board
MA-CAN-G474
MATEK CAN-G474 Board with 5Mbit/s CAN Transceiver and STM32G474 MCU AP_PERIPH CAN NODE for RC FPV Drone
MATEK CAN-G474 Board with 5Mbit/s CAN Transceiver and STM32G474 MCU AP_PERIPH CAN NODE for RC FPV Drone
MATEK CAN-G474 Board with 5Mbit/s CAN Transceiver and STM32G474 MCU AP_PERIPH CAN NODE for RC FPV Drone
MATEK CAN-G474 Board with 5Mbit/s CAN Transceiver and STM32G474 MCU AP_PERIPH CAN NODE for RC FPV Drone
  • 100 Units in Stock

Be the first to write a review.  Write a Review.

The NEW Small UAS Rule (Part 107), including all pilot and operating rules, will be effective in August 2016. For more detailed information, please see:

Need more information? Read about how to fly a UAS for your work or business.

Product 126/207

 Previous 
 List 
 Next 

This product was added to our catalog on Saturday 10 August, 2024.

Content

Custom Left Slide Out

You can add any content here, text, images, etc.



your alt text here