I. KEY
1) SEARCH/+
Press this button to enter the signal search, it will automatically search for the signals to a certain signal strength and stops on that channel , the signal is not found, will be on the channel before starting the search stopped; searching process, all the buttons will not operate ;
MENU pressed, this button is used as number +.
2) SOURCE/-
DIVERSITY: true diversity reception model，RF- A and RF- B the signal strength of a display, to achieve the best radio reception: corresponding to the RF- A and RF- B indicator LED will flash alternately.
RF A: RF A single received signal
RF B: RF B single received signal
AV IN: External input AV signal
MENU pressed，this button is used as the value -
3) MENU
LCD display parameter adjustment, where the parameters using+，- to adjust, click MEUN，choose a different adjustment items
4) GROPU/↓
Default mode, click the GROUP option, a, b，e，f cycle selection;
MENU pressed, this button is used as Down ↓
5) CHANNEL/↑
Default mode, click the option for the CH 1-8 cycles;
MENU pressed, this button is used as Up ↑
6) POWER:
Press 0.5s boot, then press 0.5s shutdown.
2. JACK
1) RF A AV OUT: RF A receives the output of an AV signal，RF A mode must.
2) RF B AV OUT: RF B receives the output of a n AV signal ，RF B mode must.
3) DIVERSITY AV OUT: DIVERSITY the received AV signal output, DIVERSITY mode must
4) DC/+12V DC IN, +12V power supply , the device operating current of 650mA @ 12V, built-in battery maximum charge current of 800mA @ 12V; if the device is working when charging , please pay attention to selecting the rated current greater than 2A/12V charging equipment.
3. Battery
Built-in 7.4V 1800mAH high-capacity polymer battery, when the battery is charging，the device where the lower left corner labeled cells , the red LED will light when charging is completed，here are bright green LED.
Note: If the device is not used for a long time , Please charged once every four months, in order to protect the battery.
Auto Pilot Controller
BRUSHLESS GIMBALS
Specials ...
