Features
Chimera7 Pro 6S LR with Walksnail Avatar HD FPV Goggles controller ELRS RTF
- Battery voltage LED status light (illuminated IF logo on the bottom)
- GoPro TPU bottom stand (GoPro protector not included)
- Lightweight Side Panels Design - Keep Your Rig Clean
- XING2 2809 1250KV efficient wide stator motors
- GPS pre-installed for more safety at a distance
- 6mm rigid arm design for more stiffness
- Top- and bottom battery mount option
Product Details
- Weight: 695g (without battery and GoPro mount)
- Total Dimensions: 258*200mm (body dimension)
- Upper(middle) Plate Thickness: 3mm
- Bottom to Top Distance: 20-29mm
- ESC: BLITZ E55 4-IN-1 2-6S ESC
- Camera Plate Thickness: 3mm
- Bottom Plate Thickness: 3mm
- Top Plate Thickness: 3mm
- Geometry: DC (DeadCat)
- HQ 7.5X3.7X3 Propellers
- Arm Thickness: 6mm
- XING2 2809 1250KV
- Wheelbase: 321mm
- FC: BLITZ F722
ELECTRONICS // BLITZ F7 Stack (F7 V1.1 + 55A 4in1 ESC):
FC //BLITZ F722 Flight Controller
Mount pattern: 30.5*30.5mm / 4mm PCB hole diameter
Smartaudio / IRC Tramp VTX protocol supported
Firmware target: IFLIGHT_BLITZ_F722
Motor outputs: 4x (SH1.0 connector)
Flash: 32MB (Blackbox flash)
I2C serial: SDA / SLA pads
Dimensions: 36.5*35 mm
Barometer: DPS310
OSD Chip: AT7456E
LED controller: Yes
MCU: STM32 F722
Beeper pad: Yes
Gyro: BMI270
Weight: 7.8g
UARTS: 6
ESC // BLITZ E55 4-IN-1 2-6S 55A ESC
Supports: DShot DShot150/300/600/MultiShot/ OneShot etc.
Mounting Holes: 30.5*30.5mm/F4mm
Target: IFLIGHT_BLITZ_G2
Supports 2-6S Lipo input
Current sensor: Yes
Constant: 55 Amps
Current rate: 200
Burst: 65 Amps
Weight: 15.3g
MCU: G071
BEC: No
Commando8 Specification:
ELRS module: ExpressLRS 915MHz or 2.4GHz (inbuilt in back of the radio)
- 915MHz system: SX1276
- 2.4GHz system: SX1280
BASE 2.4G Module:
- Supported Protocols: Futaba S-FHSS/Frsky D16/Frsky D8
- 2.4GHz system: CC2500
Antenna options:
- Dual-Band (915MHz+2.4GHz)
- Single-Band (915MHz)
- Single-Band (2.4GHz)
Control interface:
- 2x 2-position switches (can be used for arming; not momentary)
- 2x 5-axis menu buttons for full OpenTX or EdgeTX control
- 2x 3-position switches
RF Power:
- ExpressLRS 915MHz // Max Output 1000mW
- ExpressLRS 2.4GHz // Max Output 500mW
- Input: Mini High Precision Hall Gimbals with NMB bearings
- Battery: Built-in 4000mAh 1S2P 18650 Battery
- Charging: Type-C 20W Quick Charge
- Charging Connector: Type-C
- Radio Channels: 8
- Weight: 310g
Walksnail Avatar Digital HD FPV Goggles Specification:
OPTIC ENGINE
- Inter-Pupillary Distance (IPD): 57 ~ 70mm (adjustable)
- Adjustable Focus Range: +2 to -6 diopter
- Field of View (FOV): 46°
MICRO DISPLAYS
- Full HD 1080p OLED Dual Micro Displays
INPUT VOLTAGE
- 7-21V (2S-5S)
- Customizable Fit with Optional Faceplate Pad Accessories
- HD Video Output via USB-C Connector
- Supports Betaflight Canvas Mode
- Adjustable Anti-Fog Ventilation
- On/Off Power Button
- Integrated HD DVR
Chimera7 Pro HD BNF Included Components and Parts
4 x HQ 7.5X3.7X3 CW propeller + 4 x HQ 7.5X3.7X3 CCW (Color may vary)
1 x Commando 8 Radio Transmitter-ELRS (2.4G/915Mhz as optional)
2 x Albatross LHCP 5.8GHz SMA FPV Antenna
1 x Walksnail Avatar Digital HD FPV Goggles
2 x iFlight Lipo Strap 20*250mm (Black)
1 x Pre-built and Tested Chimera7 Pro
4x Crystal LHCP Short Omni Antennas
Auto Pilot Controller
BRUSHLESS GIMBALS
Specials ...
