Specials
FREE Shipping on all orders over $50.00!


Matek MATEKSYS ELRS-R24-P6 R24-P6 EXPRESSLRS2.4G 6CH PWMReceiver


$20.99

Add to Cart:


  • Description
  • Details
  • Reviews
  • offthegridsun info
Features
Matek MATEKSYS ELRS-R24-P6 R24-P6 EXPRESSLRS 2.4G 6CH $20.99
PWM Receiver ExpressLRS 3.0 VBAT Voltage Sense for RC Airplane Fixed-Wing
Product Details
Specifications
- ESP8285, SX1281
- Antenna connector: IPEX MHF 1
- 6x PWM outputs
- Support 2~8S VBat voltage sense
- RF Frequency: 2.4GHz (2400~2480MHz)
- Telemetry power: 12dbm
- Receiver output protocol: PWM
- Input voltage: 4~9V DC @ “+” pad
- Voltage sense: 34V Max. @ “VBat” pad
- Power dissipation: 45mA(binding), 85mA(wifi mode)
- PCB size: 20mm x 18mm
- Weight: 2g w/ antenna
Firmwares
- ExpressLRS 3.0 or newer, DIY 2.4 GHz / DIY 2400 RX PWMP EX
- ExpressLRS wiki for PWM receiver, Click HERE
- Make sure Receiver and TX module both are running Express LRS 3.0 or newer
——————————————————
- Receiver has Express LRS 3.0 preloaded with binding phrase “123456”,
the Receiver will never enter binding mode if using the traditional binding procedure.
- You need to reflash it with your binding phrase OR go into Web UI to set your binding phrase.
Flashing via Wifi - Disconnect ESC and servos from receiver first.
- Power on receiver by 5V source. Receiver’s LED(Red) will blink
slow at first, and after 20s, it should blink fast indicating it’s on Wifi Hotspot Mode.
- More detailed steps, pls refer this page.
- Target: DIY 2.4 GHz / DIY 2400 RX PWMP EX
Flashing via UART
1. Disconnect ESC and servos from receiver first.
2. Wire the receiver into the USB-TTL adapter, with TX on receiver
connected to the Rx on the USB-TTL, and RX on receiver connected to
the Tx of the USB-TTL. Wire 5V and GND of the USB-TTL to 5V and GND of the Receiver.
3. Press the boot button while powering on the receiver, then
release – the Red LED on receiver should now be solid.
4. Select the target DIY 2.4 GHz / DIY 2400 RX PWMP EX and
“UART” for Flashing Method, set your bind phrase and Firmware
Options and once done, click on Build and Flash.
ELRS-R24-P6
Matek MATEKSYS ELRS-R24-P6 R24-P6 EXPRESSLRS 2.4G 6CH PWM Receiver ExpressLRS 3.0 VBAT Voltage Sense
Matek MATEKSYS ELRS-R24-P6 R24-P6 EXPRESSLRS 2.4G 6CH PWM Receiver ExpressLRS 3.0 VBAT Voltage Sense
  • 100 Units in Stock

Be the first to write a review.  Write a Review.

The NEW Small UAS Rule (Part 107), including all pilot and operating rules, will be effective in August 2016. For more detailed information, please see:

Need more information? Read about how to fly a UAS for your work or business.

Product 73/120

 Previous 
 List 
 Next 

This product was added to our catalog on Thursday 20 October, 2022.

Content

Custom Left Slide Out

You can add any content here, text, images, etc.



your alt text here