Wellcome to Offthegridsun.com


MATEK H743-WING V2 ArduPilot INAV 3-8S H743 Wing with OSD FC


$115.00

Add to Cart:


  • Description
  • Details
  • Reviews
  • offthegridsun info
Features
MATEK H743-WING V2 ArduPilot INAV 3-8S H743 Wing with OSD Flight Controller 30.5X30.5mm
for RC Airplane Fixed-Wing Racing Drones
Product Details
FC Specifications
- MCU: STM32H743VIT6, 480MHz , 1MB RAM, 2MB Flash
- IMU: MPU6000 (SPI1) & ICM42605 (SPI4)v - Baro: Infineon DPS310 (I2C2)
- OSD: AT7456E (SPI2)
- Blackbox: MicroSD card slot (SDIO)
- 7x Uarts (1,2,3,4,6,7,8) with built-in inversion.
- 13x PWM outputs(including "LED" pad)
- 2x I2C
- 1x CAN
- 6x ADC (VBAT, Current, RSSI, Analog AirSpeed, VB2, CU2)
- 3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator(Red)
- 1x SPI3 breakout
- USB/Beep Extender with Type-C(USB2.0)
Dual Camera Inputs switch
- 5V/9V(12V) for Camera/VTX power switch
- High-precision Current Sense (90A continuous, 220A peak)
- Battery Voltage Sensor: 1K:10K (Scale 1100 in INAV, BATT_VOLT_MULT 11.0 in ArduPilot)
- ADC VB2 voltage divider: 1K:20K
- ADC AirSpeed voltage divider: 20K:20K
- Static power 160mA@5V
FC Firmware
- ArduPilot(ChiBiOS): MATEKH743
- INAV: MATEKH743
PDB
- Input voltage range: 8~36V (3~8S LiPo) w/TVS protection
- 2x ESC power pads
- Current Senor: 220A, 3.3V ADC (Scale 150 in INAV, 66.7 A/V in ArduPilot)
- Sense resistor: 90A continuous, 220A peak.
BEC 5V output
- Designed for Flight controller, Receiver, OSD, Camera, Buzzer, 2812 - LED_Strip, Buzzer, GPS module, AirSpeed
- Output 5.15 +/- 0.1V DC
- Continuous current 2 Amps, 3A Peak
BEC 9V /12V output
- Designed for Video Transmitter, Camera, Gimbal ect.
- Continuous current 2 Amps, 3A Peak
- 12V option with Jumper pad
BEC Vx output
- Designed for Servos
- Voltage adjustable, 5V Default, 6V or 7.2V via jumper
- Continuous current 8 Amps, 10A Peak
BEC 3.3V output
- Linear Regulator
- Continuous current: 200mA
Physical
- Mounting: 30.5 x 30.5mm, Φ4mm with Grommets Φ3mm
- Dimensions: 54 x 36 x 13 mm
- Weight: 30g with USB extender
1x H743-WING
1x USB(Type-C)/Beep (Passive buzzer) Extender
1x 20cm JST-SH-6P to JST-SH-6P cable for USB extender.
2x 20cm JST-GH-4P to JST-GH-4P cable for CAN & I2C port
1x Rubycon ZLH 35V 470uF capacitor
Dupont 2.54 pins (Board is shipped unsoldered)
H743-WING-V2
MATEK H743-WING V2 ArduPilot INAV 3-8S H743 Wing with OSD Flight Controller 30.5X30.5mm for RC Airplane Fixed-Wing Racing Drones
MATEK H743-WING V2 ArduPilot INAV 3-8S H743 Wing with OSD Flight Controller 30.5X30.5mm for RC Airplane Fixed-Wing Racing Drones
MATEK H743-WING V2 ArduPilot INAV 3-8S H743 Wing with OSD Flight Controller 30.5X30.5mm for RC Airplane Fixed-Wing Racing Drones
MATEK H743-WING V2 ArduPilot INAV 3-8S H743 Wing with OSD Flight Controller 30.5X30.5mm for RC Airplane Fixed-Wing Racing Drones
  • 100 Units in Stock

Be the first to write a review.  Write a Review.

The NEW Small UAS Rule (Part 107), including all pilot and operating rules, will be effective in August 2016. For more detailed information, please see:

Need more information? Read about how to fly a UAS for your work or business.


This product was added to our catalog on Sunday 27 February, 2022.

Content

IMPORTANT MESSAGE

You are responsible to fly your drone safely and legally. In Canada, you must:

.



your alt text here