Wellcome to Offthegridsun.com


Holybro FC FETtec G4 Flight Controller Latest STM32G4 Processor


$140.00

Add to Cart:


  • Description
  • Details
  • Reviews
  • offthegridsun info
Features
The FETtec KISS FC G4 is a flight controller running the KISS V2 firmware
for high performance, simple setup. The flight controller has an onboard
real-pit for TBS Unify Pro Nano VTXs and headers for direct connection
to a TBS Crossfire Nano RX. The FETtec FC supports 30x30 and 20x20 mounting.
Features:
- STM32 G4 Processor, 170MHz with MPU6000 Gyro
- Built-in real Pit-Mode
- Seperate onboard 5V BEC For RX
- 5V/16V BEC for VTX
- 20x20mm M2 and 30.5mmx30.5mm M3 mounting holes
- 8 Native DSHOT2400 outputs
- 4 Signal and ground pads in each corner
- 8 pin connector for solder free FETtec ESC connection
Product Details
* Latest STM32G4 Processor
- 170Mhz + Math accelerator
- MPU6000
* Supply voltage 6-27V (2S-6S Lipo)
* 2x dedicated onboard BEC (max. 600mA each)
- 5V BEC for RX
- 5V/16V BEC for VTX (switchable and real Pit*)
* 2x 8 pin connector for solder free ESC connection
- Connector 1: ESC signal 1-4, telemetry, VCC, GND
- Connector 2: ESC signal 5-8 (depending on UAV type 1-4), telemetry, VCC, GND
* 1x 8 pin connector for solder free VTX, cam connection and OSD or digital systems
- real Pit* VCC, GND, Video in, Video out, BEC 5V/16V, VCS/TX3, RX3
* 2x 6 pin connectors for serials
- RX1, TX1, 3.3V, VCC, 5V, GND
- RX3, VCS/TX3, RGB LED, VCC, 5V, GND
* 1x 4 pin connector for receiver
- Signal, TLM, 5V, GND
* 5 UART serials
- UART 1 free
- UART 2 used for Receiver
- UART 3 free
- UART 4 used for onboard OSD, can be set free
- UART 5 used for ESCs / TLM / Onewire
* 4 ESC solder pads (Signal/GND) in each corner
* Buzzer pads
* 4 tiny RGB LEDs (selectable color)
* Supported ESC protocols
- PWM, Oneshot125, Oneshot42, Dshot150/300/600/1200/2400, FETtec Onewire
* FETtec KISS firmware
* Onboard OSD
- Graphic OSD (STM32)
- Full KISS Tuning
- Filter (PIDs, Rates, Settings)
- LED control (RGB LED, Racewire)
- VTX
- Live data graphs (Voltage, motor rpm, current,
motor temp, gyro values, link quality)
- KISS GPS support + live map
- Custom graphic pilot logo
- Stick overlay
- Custom layout
- can be deactivated for usage of digital systems
* Connector type: JST-SH-1mm
Item Packing
1X FETtec KISS FC G4
1X 8 Pin SH1.0 Cable
1X 6 Pin SH1.0 Cable
4X M2 Anti-Vibration Silicone Grommet Insert
FET-G4
Holybro FETtec FC G4 Flight Controller Latest STM32G4 Processor /KISS FC Firmware /2S-6S Lipo /Onboard OSD For FPV Racing Drone
Holybro FETtec FC G4 Flight Controller Latest STM32G4 Processor /KISS FC Firmware /2S-6S Lipo /Onboard OSD For FPV Racing Drone
Holybro FETtec FC G4 Flight Controller Latest STM32G4 Processor /KISS FC Firmware /2S-6S Lipo /Onboard OSD For FPV Racing Drone
Holybro FETtec FC G4 Flight Controller Latest STM32G4 Processor /KISS FC Firmware /2S-6S Lipo /Onboard OSD For FPV Racing Drone
Holybro FETtec FC G4 Flight Controller Latest STM32G4 Processor /KISS FC Firmware /2S-6S Lipo /Onboard OSD For FPV Racing Drone
  • 100 Units in Stock

Be the first to write a review.  Write a Review.

The NEW Small UAS Rule (Part 107), including all pilot and operating rules, will be effective in August 2016. For more detailed information, please see:

Need more information? Read about how to fly a UAS for your work or business.


This product was added to our catalog on Saturday 14 May, 2022.

Content

IMPORTANT MESSAGE

You are responsible to fly your drone safely and legally. In Canada, you must:

.



your alt text here