welcome to or store


BaseCam SimpleBGC 32-bit CAN_MCU


$210.99

Add to Cart:
Min:  3

  • Description
  • Details
  • Reviews
  • offthegridsun info
Features
BaseCam SimpleBGC 32-bit CAN_MCU
Unlike other BaseCam controllers, SimpleBGC 32-bit «CAN_MCU» controller
has no onboard motor drivers and requires external drivers to build a
gimbal, as shown in this diagram. It is designed primarily to work with
the CAN Driver modules, though «I2C_Drv» drivers are supported, too.
It supports both the CAN_IMU and regular I2C IMU sensors.
The new important function of this controller is an integrated electronic
power switch that could be used as a main power switch for the gimbal*.
It allows to communicate currents up to 30A continuous, providing soft
startup current to charge buffer capacitors in CAN drivers, can be switched
ON/OFF by the external logical input, has overcurrent and Undervoltage
protection. It supports two kinds of buttons: latching switch and momentary push button.
This controller is an ideal solution to build pro-grade stabilizers able to carry heavy cameras.
Other features are common for the «Extended» and «Pro» series of controllers:
Current sensor to measure battery power consumption
2×CAN ports, 1×I2C port
Joystick port having 3×analog signal inputs, mode button input, +3.3V power line
Built-in sound beeper
3×UARTs for Serial API / Spektrum / S-bus / External IMU sensors connections
Up to 6s LiPo battery is supported
Supports extra features in the firmware that are not available in «Regular»
and «Tiny» versions (see «Versions comparison chart» in the «Appendix A» of the User Manual)
Product Details
Specifications
Size of the board 35×50 mm
Weight 9.74 g
Diameter of the mounting holes 3 mm
Power supply voltage 8–26 V (3s-6s LiPo)
Powering from +5V is possible **
Power switch continuous current 30 A*
Power switch overcurrent protection
0 — 40 A adjustable
5V output current
up to 1 A
3.3V output current up to 1 A
* in a short period of time. Can be extended with the proper cooling.
** It's possible to power the board using an external DC/DC +5V if
connected to "+BAT" and "+5V out" pins. The "Electronic power switch"
option should be disabled in GUI, and "Power switch" is shortened.
BaseCam SimpleBGC 32-bit CAN_MCU
BaseCam SimpleBGC 32-bit CAN_MCU
BaseCam SimpleBGC 32-bit CAN_MCU
BaseCam SimpleBGC 32-bit CAN_MCU
BaseCam SimpleBGC 32-bit CAN_MCU
BaseCam SimpleBGC 32-bit CAN_MCU
BaseCam SimpleBGC 32-bit CAN_MCU
  • 100 Units in Stock

Be the first to write a review.  Write a Review.

The NEW Small UAS Rule (Part 107), including all pilot and operating rules, will be effective in August 2016. For more detailed information, please see:

Need more information? Read about how to fly a UAS for your work or business.


This product was added to our catalog on Thursday 22 August, 2024.

Content

Custom Left Slide Out

You can add any content here, text, images, etc.



your alt text here