welcome to or store

Alexmos SimpleBGC BGC 32BIT Extended 2-IMU Set


Add to Cart:

  • Description
  • Details
  • Reviews
  • offthegridsun info
SimpleBGC 32bit Extended 2-IMU Set
YES, this is a GENUINE Alex Mos new 32 bit 3 axis controller!
SimpleBGC 32bit extended main bord – 1 pc
Motor 30 cm wires – 3 pcs
Battery 20 cm wire – 1 pc
Ferrite coils 10-15 mm diameter, 3-5 mm thickness – 3 pcs
Encoder 10 cm wires – 3 pcs
IMU sensor board – 1 pc
IMU 50 cm wire – 1 pc
Encoder-enabled firmware
CAN_Driver Kit includes three driver boards.
* Second I2C IMU is integrated in the board.
Basic functions of the controller
-32-bit MCU — ARM Cortex M4. Effectively calculates the complex tasks for 3-axis stabilization.
-Allows camera control with the RC or analog joystick.
-Use several switchable profiles for different modes of operation
-Supports variety of RC protocols: PWM, Sum-PPM, spektrum and s-bus.
- Battery voltage monitoring, compensating voltage drop in the PID-regulator.
- Low battery alarm (output to 5V active buzzer).
- Increased number of inputs for controlling signals + 3 additional reserved input/output AUX1-AUX3.
- Can supply up to 1A current for external devices on the 5V power line.
- Dedicated UART-socket to connect optional Bluetooth module
- Reverse-polarity protection, overheat and overcurrent protection
- USB interface for the PC connection, to configure, control and upgrade firmware.
-Graphical user interface to manage the settings. Windows / OS X / Linux versions.
- Control through the Serial-protocol using dedicated API.
- Improved attitude estimation algorythms
-Optional second IMU, that will increase the short-term precision of the stabilization 10x-30x times and will make stable work in any frame position.
General info on the Basecam site:
New firmware & GUI 2.4b8 for 32bitters is ready to go:
New Basecam Configuration Guide:
SimpleBGC 32-bit Extended controller is the advanced version of SimpleBGC 32-bit brushless gimbal controller introduces new capabilities:
Built-in Frame IMU
Current sensor to mesure battery power consumption
CAN-bus to replace I2C for the IMU sensor and other periphery connection
Dedicated 3x SPI/PWM ports for encoder connection
Additional I2C port to connect 2nd IMU or encoders
Built-in sound beeper
Up to 6s LiPo battery is supported
Size of the board 50×50 mm
Distance between the mounting holes 45 mm
Diameter of the mounting holes 3 mm
Power supply voltage 8-26 V (3s-6s LiPo)
Maximum motor current 1,5 A
5V output current to power external devices up to 1 A
3V output current 150 mA
Wire Diamter
  • 95 Units in Stock

Be the first to write a review.  Write a Review.

The NEW Small UAS Rule (Part 107), including all pilot and operating rules, will be effective in August 2016. For more detailed information, please see:

Need more information? Read about how to fly a UAS for your work or business.

This product was added to our catalog on Thursday 06 December, 2018.


Custom Left Slide Out

You can add any content here, text, images, etc.

your alt text here