Waterproof MTI65162 100/190KV Brushless Inrunner Motor

Fully Waterproof MTI65162 100/190KV Brushless Inrunner Motor for Electric Surfboard/Efoil/Jetski/Esk8
Model No.: MTI65162-195-SF
KV: 195, 100
Max Current: 310A
Input Volt: 6-20S Lipo
Max Output Watt: 9100W
Rated Power: 8100w
Max. torque: 9N.M
Motor Weight: 2400g
Shaft: 12mm
Motor dimension: Φ650x 162mm
Idle Current @8.4V without Loading: 1.6A
For customers’ convenience, we made 10mm diameter screw on the top of the shaft, so you can install the propeller directly, and to match with the motor, we made a suitable propeller as following:

How to Ensure Its Waterproof Performance:
To make sure its waterproof, every joint surface of the motor exterior parts, including top/bottom cover and motor case are seamless structures, wiring port and wiring terminals, a static sealing mechanism is arranged between the joint surface of the fastening bolt and the bolt hole, and a dynamic sealing mechanism is arranged between the motor shaft and the shaft hole.
The components on the outer surface of the motor are made of corrosion-resistant materials or are provided with an anti-corrosion layer. Since the gaps or passages that may exist inside and outside the waterproof motor are blocked by the sealing mechanism, a reliable waterproof effect can be obtained, and even if the water is poured for a long time, the water will be fully blocked inside water, and the short circuit failure occurs.
2 Versions: Sensored and Sensorless
To meet different customers requirements, we designed one version with hall sensor, one version without hall sensor.
The sensored version can not only be used underwater but also can be used on electric skateboard, fighting robots, electric cars, etc.,